News Center

Industry News

Company News

29

2019-08

Slab continuous casting aerosol nozzles

This type of aerosol nozzle nozzle tube mounted on the nozzle plate, can be bolted vertically to the receiver plate, no longer need water supply, air supply of small thin flexible tube. All nozzles are installed on the back side of the fan section structure, only the extension tube of the nozzle to fix the nozzle to its spray position, the collection tube stiffness is high, the nozzle positioning is stable, the spray position is guaranteed. The water supply and air supply without hose is realized.

2019-08-29

29

2019-08

Dust removal gun spray characteristics and uses

The dust removal gun is a high efficiency two-fluid dual-phase nozzle, which has good effect on removing fine dust in flue gas. The gas pressure of the nozzle can be set a constant value, and only the flow rate of the liquid is changed, and the adjustment ratio can be up to 1:10; the particle diameter of the spray is about 100 microns, and the fine dust in the flue gas is separated from the flue gas after bonding, so as to achieve the purpose of dust removal. Due to the large through-hole of the nozzle, which reduces clogging, pool water and external drainage can be used. The nozzle is mainly used for flue gas cooling and dust removal in steel, cement, environmental protection, power plants, chemical and other industries.

2019-08-29

26

2019-08

Nozzle impact

The impact force of a nozzle is the force with which the liquid ejected from the nozzle strikes the target surface. There are several different ways to express the impact force of a nozzle, and the most useful impact force value related to the performance of a spray nozzle is the impact force per square centimeter. Essentially, this value depends on the spray shape distribution of the nozzle and the spray angle of the nozzle, in order to obtain a known impact force per square centimeter of a nozzle (kg/cm2), the first formula to determine the total theoretical impact force of the spray.

2019-08-26

26

2019-08

Classification of fan spray nozzles

Fan nozzles are used for metal processing cleaning,, plating line rinsing, agricultural products cleaning; food, steel, paper and other industries cleaning, semiconductor cleaning, color tube glass case cleaning, spray coating, printed circuit board cleaning, development, shadow and etching processes, rain test, jet cooling, jet cooling, removal of oil stains stains, LCD glass cutting cleaning, spraying and cooling applications.

2019-08-26

26

2019-08

Slab continuous casting aerosol nozzles

This type of aerosol nozzle nozzle tube mounted on the nozzle plate, can be bolted vertically to the receiver plate, no longer need water supply, air supply of small thin flexible tube. All nozzles are installed on the back side of the fan section structure, only the extension tube of the nozzle to fix the nozzle to its spray position, the collection tube stiffness is high, the nozzle positioning is stable, the spray position is guaranteed. The water supply and air supply without hose is realized.

2019-08-26

26

2019-08

Crystallizer vibration device

Crystallizer vibration device is the key equipment in continuous casting, its vibration form, control mode and online monitoring and adjustment, has an important impact on the quality of continuous casting. The crystallizer vibration device is the key equipment in continuous casting, its vibration form, control method and online monitoring and adjustment have an important influence on the quality of continuous casting. The vibration form, control method and online monitoring and adjustment have an important influence on the quality of continuous casting.

2019-08-26

27

2022-08

After 2 years of preparation, the new version of Yangzhou Zhongyeye product samples were printed on May 8, and an electronic version is attached, which can be easily understood and used by customers.

After 2 years of preparation, the new version of Yangzhou Zhongyeye product samples were printed on May 8, and an electronic version is attached, which can be easily understood and used by customers.

2022-08-27

After 2 years of preparation, the new version of Yangzhou Zhongyeye product samples were printed on May 8, and an electronic version is attached, which can be easily understood and used by customers.

27

2022-08

On June 18, the company's newly purchased fully automatic unmanned CNC machine tools were officially put into use.

On June 18, the company's newly purchased fully automatic unmanned CNC machine tools were officially put into use.

2022-08-27

On June 18, the company's newly purchased fully automatic unmanned CNC machine tools were officially put into use.
< 12 >